{"id":21778,"date":"2026-06-09T12:25:44","date_gmt":"2026-06-09T12:25:44","guid":{"rendered":"https:\/\/xgamingserver.com\/blog\/palworld-server-requirements-ram\/"},"modified":"2026-06-09T12:25:44","modified_gmt":"2026-06-09T12:25:44","slug":"palworld-server-requirements-ram","status":"publish","type":"post","link":"https:\/\/xgamingserver.com\/blog\/palworld-server-requirements-ram\/","title":{"rendered":"Palworld Server Requirements: How Much RAM & CPU Do You Need?"},"content":{"rendered":"

Palworld is famously hungry on a server \u2014 far more than its cartoon-y look suggests. If you’re planning to host your own world, the two questions that decide everything are how much RAM you need<\/strong> and how fast your CPU is<\/strong>. This guide covers the official Palworld dedicated server requirements, a practical RAM-by-player-count breakdown, and why Palworld is so CPU-sensitive.<\/p>\n\n

Official Palworld dedicated server requirements<\/h2>\n

Straight from Pocketpair’s official server documentation, the baseline for a Palworld dedicated server is:<\/p>\n

\n
Component<\/th>Official requirement<\/th><\/tr><\/thead>
CPU<\/strong><\/td>4 cores or more recommended<\/td><\/tr>\n
RAM<\/strong><\/td>Minimum 8 GB \u2014 but Pocketpair warns this “increases the possibility of server crashes due to out of memory.” Recommended: larger than 32 GB.<\/td><\/tr>\n
Storage<\/strong><\/td>SSD recommended \u2014 low-performance storage may corrupt saved data<\/td><\/tr>\n
Network port<\/strong><\/td>UDP 8211 (default, configurable)<\/td><\/tr>\n
OS<\/strong><\/td>Windows 64-bit or Linux 64-bit<\/td><\/tr>\n<\/tbody><\/table>
Source: official Palworld dedicated server documentation.<\/figcaption><\/figure>\n

Note the gap between “minimum” and “recommended”: 8 GB will technically boot a server, but Pocketpair itself flags it as crash-prone. A Palworld dedicated server supports up to 32 players<\/strong>, and RAM use scales with both player count and how much your group builds.<\/p>\n\n

How much RAM does a Palworld server need?<\/h2>\n

The official “32 GB+” recommendation is sized for a full, busy server. For most groups you can scale RAM to your player count. The practical sizing below reflects common community experience \u2014 treat it as a floor, not a ceiling, because Palworld’s memory use grows as your world and bases expand:<\/p>\n

\n
Players<\/th>Practical RAM<\/th>Best for<\/th><\/tr><\/thead>
Up to 4<\/td>8 GB<\/td>A small friends group, light building<\/td><\/tr>\n
5\u201310<\/td>12 GB<\/td>A typical co-op community<\/td><\/tr>\n
10\u201316<\/td>16 GB<\/td>Active server with multiple bases<\/td><\/tr>\n
16\u201332<\/td>32 GB<\/td>Full server, heavy automation, mods<\/td><\/tr>\n<\/tbody><\/table>
Practical guidance based on community testing. Always size up if you run mods or large factory bases.<\/figcaption><\/figure>\n\n

Why Palworld is CPU-bound (and why the CPU matters more than RAM)<\/h2>\n

Here’s the part most hosts gloss over: Palworld leans heavily on single-thread CPU performance<\/strong>. Every Pal working in a base, every conveyor and production line, every breeding farm and capture in the world is simulated by the server \u2014 and a lot of that work lands on one or two CPU cores rather than spreading across many. That’s why two servers with identical RAM can feel completely different: the one on a faster CPU stays smooth while the slower one stutters once the bases get busy.<\/p>\n

The official docs ask for “4 cores+,” but in practice clock speed and per-core performance matter more than core count<\/strong>. A modern high-clock CPU will hold a 16\u201332 player server far better than an older many-core chip. If your server lags as your group builds more automation, the CPU \u2014 not RAM \u2014 is usually the bottleneck.<\/p>\n\n

Storage, network and the memory-leak gotcha<\/h2>\n